EN 50382-2 High Temperature Single Core Cables with Reinforced Insulation 3.6/6 kV - Rolling Stock Cable

Products

Hot Products

RS 485 Databus Cables 300/500 V

ICEA S-75-381 Type MP-GC Three-Conductor Mine Power Feeder Cable, CPE Jacket, 8kV

CAN-Bus

Tel:(+86)15253187362

Attn:Tony Liu

Email:[email protected]

EN 50382-2 High Temperature Single Core Cables with Reinforced Insulation 3.6/6 kV

CONSTRUCTIONConductorExtra flexible tinned annealed copper wires (red copper only for 150 C core temperature) class 6 according to HD 383InsulationSilicon rubber according to EN 50382-1 (EI 112)ELECTRICAL & MECHANICAL PROPERTIESNominal Voltage3.6/…

61EN 50382-2 High Temperature Single Core Cables with Reinforced Insulation 3.6_6 kV .pdf Contact us

Previous: EN 50382-2 High Temperature Single Core Screened & Sheathed Cables 1.8/3 kV or 3.6/6 kV Next: WTB (Wired Train Bus) Cables

CONSTRUCTION

Conductor	Extra flexible tinned annealed copper wires (red copper only for 150 °C core temperature) class 6 according to HD 383
Insulation	Silicon rubber according to EN 50382-1 (EI 112)

ELECTRICAL & MECHANICAL PROPERTIES

Nominal Voltage	3.6/6 kV
Max. Conductor Temperature	120°C /150°C (fixed installation)
Min. Permissible Ambient Temperature	-25°C/-40°C (fixed installation)
Bending Radius	3 x Overall Diameter (D<12mm); 4 x Overall Diameter (D>12mm)

CHEMICAL & ENVIRONMENTAL PROPERTIE

EN 60684-2	No fluorine
EN 50305; EN 60811-2-1	Resistance to mineral oil & fuel oil, acid & alkali
EN 50305	Resistance to ozone

FIRE PERFORMANCE FOR ROLLING STOCK APPLICATION

EN 50306-2	Hazard levels HL1, HL2, HL3
DIN 5510-2	Protection level 1/2/3/4
BS 6853	Interior use 1a, 1b, II; Exterior use 1a, 1b, II
NF F 16-101	F0
EN54454-2	R15 Interior/ R16 Exterior HL1, HL2, HL3

FIRE PERFORMANCE IN GENERAL

EN 50265-2-1; IEC 60332-1-2; NF C 32-070 2.1 (C2)	Vertical flame propogation for a single insulated wire or cable
EN 50266-2-4 + EN 50305; IEC 60332-3-24; NF C 32-070 2.2 (C1); VDE 0472 Teil 804	Vertical flame spread of vertically mounted bunched wires or cables
EN 50268-2; IEC 61034-2; NF C 32-073 ; NF C 20-902; NF F 16 101; VDE 0472 Teil 816	Low Smoke Emission
EN 50267-2-1; IEC 60754-1; NF C 32-074; NF C 20-454; VDE 0472 Teil 815	Halogen Free
EN 50267-2-2/3; IEC 60754-2; NF C 32-074; NF C 20-453; VDE 0472 Teil 813	Low Corrosivity (Acidity & Conductivity)
EN 50305; NF X 70-100; NF F 63 808; TM1-04; BS6853	Low Toxicity
NF F 63 808; BS6853; NF F 16 101	Smoke index
EN45545-2	Requirement for fire behavior of materials & components R15/R16

FRL-HT-6SURI 3.6/6 KV

Nominal Cross- Sectional Area	Conductor Diameter (a)	Min. Mean Thickness of Insulation	Overall Diameter		Weight	Max.Conductor Resistance		Min. Insulation Resistance
			Overall Diameter			Tinned Conductor	Plain Conductor	Min. Insulation Resistance
			Min.	Max.		20°C	20°C	20°C	150°C
mm²	mm	mm	mm	mm	kg/km	Ω/km	Ω/km	MΩ x km	MΩ x km
50	9.2	3.0	15.2	17.8	560	0.393	0.386	340	0.70
70	11.0	3.0	16.9	19.8	770	0.277	0.272	300	0.60
95	12.5	3.0	18.3	21.4	970	0.210	0.206	270	0.55
120	14.2	3.1	20.1	23.5	1200	0.164	0.161	250	0.50
150	15.8	3.1	21.6	25.3	1480	0.132	0.129	220	0.45
185	17.5	3.2	23.4	27.4	1800	0.108	0.106	210	0.40

(a)= For information, indicative only