×
English
Standard Wall Single Core Sheathed Cables (1500V, 3000V)
APPLICATIONThese cables are used as power and control cable for protected installations inside and outside of rail and transport vehicles, where handling and installation cost are an important factor, suitable for use in control, auxiliary and main ci…
NF F 63-826 Standard Wall Single Core Sheathed Cables 1500 V, 3000 V.pdf Contact us
Previous: Standard Wall Single Core Unsheathed Cables (500V, 1000V, 1500V, 3000V)Next: Standard Wall Multicore Unscreened Cables (500V)

APPLICATION

These cables are used as power and control cable for protected installations inside and outside of rail and transport vehicles, where handling and installation cost are an important factor, suitable for use in control, auxiliary and main circuit wiring such as cable harnesses, switchboards and control panels, driver desks etc

CONSTRUCTION

ConductorStranded tinned copper wires to IEC 60228 Class 5
InsulationHalogen free compound
SheathHalogen free compound

ELECTRICAL & MECHANICAL PROPERTIES

Nominal Voltage1500V, 3000V
Max. Conductor Temperature90°C/105°C
Temperature Range-25°C~90°C
Bending Radius4 × Overall Diameter

FIRE PERFORMANCE FOR ROLLING STOCK APPLICATION

NF F 63-826

NF F 16-101

BS 6853

EN54454-2

FIRE PERFORMANCE IN GENERAL

EN 50265-2-1; IEC 60332-1-2; NF C 32-070 2.1 (C2)Vertical flame propogation for a single insulated wire or cable
EN 50266-2-4 + EN 50305; IEC 60332-3-24; NF C 32-070 2.2 (C1); VDE 0472 Teil 804Vertical flame spread of vertically mounted bunched wires or cables
EN 50268-2; IEC 61034-2; NF C 32-073 ;  NF C 20-902; NF F 16 101; VDE 0472 Teil 816Low Smoke Emission
EN 50267-2-1; IEC 60754-1; NF C 32-074;  NF C 20-454; VDE 0472 Teil 815Halogen Free
EN 50267-2-2/3; IEC 60754-2; NF C 32-074; NF C 20-453; VDE 0472 Teil 813Low Corrosivity (Acidity & Conductivity)
EN 50305; NF X 70-100; NF F 63 808; TM1-04; BS6853 Low Toxicity
NF F 63 808; BS6853; NF F 16 101Smoke index
EN45545-2Requirement for fire behavior of materials & components R15/R16

BRAIL SW-1.5S 1500V

Nominal Cross Sectional AreaNumber & Nominal Diameter of StrandsNominal Insulation ThicknessNominal Sheath ThicknessOverall DiameterWeight
Min.Max.
mm²No/mmmmmmmmmmkg/km
1.530/0.252.31.58.99.9130
2.550/0.252.31.59.310.3145
10.080/0.402.31.811.913.3290
50.0396/0.402.52.218.320.3850
120.0608/0.502.82.625.027.51770
150.0756/0.502.82.626.729.32150
185.0925/0.502.92.829.031.82530

BRAIL SW-3S 3000V

Nominal Cross Sectional AreaNumber & Nominal Diameter of StrandsNominal Insulation ThicknessNominal Sheath ThicknessOverall DiameterWeight
Min.Max.
mm²No/mmmmmmmmmmkg/km
150.0756/0.503.62.628.230.92270
185.0925/0.503.72.830.533.42660


Copyright © 2024 BURY CABLE. All rights reserved.